ARM 36-610

The new Automatic Reducer Machine is designed to produce high quality tapered reducers/increasers.  It has two workstations which each form a locking rib; one on the larger end of the reducer and one on the smaller end.  Only one operator is required.
The Reducer Machine is available in the 2 size configurations noted above (other sizes available upon request).  The ARM 36 is equipped with a full set of tooling to produce any combination of sizes between 3" and 6" Ø, in 1" increments.  The ARM 610 is equipped with a full set of tooling to produce any combination of sizes between 6" and 10" Ø, in 1" increments.  Size changes take only 15-30 minutes to complete (depending on size).

Sizes produced by ARM 36:
6"-5"    6"-4"    6"-3"    5"-4"    5"-3"    4"-3"

Sizes produced by ARM 610:
10"-9"     10"-8"     10"-7"     10"-6"     9"-8"
9"-7"      9"-6"      8"-7"      8"-6"     7"-6"

Click download to view a printable Flyer with all specifications for the ARM 3"-10" in PDF file format.


Reducer Machines have full safety features; including warning labels, an emergency stop button, yellow guards, and a yellow wire mesh safety frame.


Machine cycle time = 4 seconds for all sizes

Load time = 11 seconds (dependent upon speed of operator)

Complete Reducers:
4 per minute
240 per hour
1,920 per 8 hour shift
480,000 per year (1 shift/day; 5 days/week; 50 weeks/year)

Assuming labor cost of one operator = $25,000/year, one reducer = 5.2¢ labor to produce

Technical Features

Pre-programmed p.l.c. (Allen-Bradley MicroLogix 1200)

Proportional valves with precise ramping control of gear heads

Easy-to-use operator interface

Electrical: 230/460 VAC 3Ø

No air supply required

Integrated lubricating system

Hardened and heat-treated tooling


Machines will carry a full 1 year warranty on all materials and workmanship.
More information here.

Recommended Material

0.012" - 0.017" thick galvanized


Sitemap | Contact Us | Site Designed By: addsight, llc
©2010 Cleveland Tool & Machine. All Rights Reserved.