AAM 678-916

The Automatic Angle Machine is designed to produce high quality straight angles, which can be hand turned to any angle between 0° and 45°.  The cutting plane of these machines is 22.5° from the horizontal plane, thus requiring 1 cut for a 45° angle.  Only one operator is required.
The Angle Machine is available in the 2 size configurations noted above (other sizes available upon request).  They are equipped with a full set of tooling to produce 6", 7", 8"; or 9", 10", 12", 14", 16" Ø angles.  Tooling can also be purchased separately if only 1 or 2 sizes are needed.  Size changes take only 10-15 minutes to complete.

Click download to view a printable Flyer with all specifications for the Angle Mach. in PDF file format.

Safety

Angle machines have full safety features; including warning labels, an emergency stop button, yellow guards, and a yellow wire mesh safety frame.

Productivity

Machine cycle time = 5 seconds for all sizes

Load time = 2 seconds (dependent upon speed of operator)

Complete Angles:
8.6 per minute
514 per hour
4,114 per 8 hour shift
1,000,000+ per year (1 shift/day; 5 days/week; 50 weeks/year)

Assuming labor cost of one operator = $25,000/year, one angle = 2.4¢ labor to produce

Technical Features

Pre-programmed p.l.c. (Allen-Bradley MicroLogix 1200)

Proportional valve with precise ramping control of gear head

Easy-to-use operator interface

Electrical: 230/460 VAC 3Ø

No air supply required

Integrated lubricating system

Hardened and heat-treated tooling

Warranty

Machines will carry a full 1 year warranty on all materials and workmanship.
More information here.

Recommended Material

6",7",8" = 0.012" - 0.024" thk. galvanized

9", 10" = 0.014" - 0.024" thk. galvanized

12", 14" = 0.016" - 0.024" thk. galvanized

16" = 0.017" - 0.024" thk. galvanized

 

Sitemap | Contact Us | Site Designed By: addsight, llc
©2010 Cleveland Tool & Machine. All Rights Reserved.